Enjoy seamless Wi-Fi coverage in every corner of your home with the GO Smart Wi-Fi Starter Kit.

Already have your GO Smart Wi-Fi Nokia Beacons and want to connect them to your Nokia modem? Just follow these simple steps:

1. Connect the mobile phone you will be using to set up your network to the Wi-Fi of your GO Smart Wi-Fi Nokia modem. If you are connecting for the first time, simply scan the QR code on the back of the modem or use the SSID and WiFi key.
2. Download the Nokia WiFi app from Google Play Store or Apple App Store.
3. Open the app and tap on Sign In. Enter the username (advanceduser) and password found on the back of your Nokia modem.
4. To connect your GO Smart Wi-Fi Beacon, go to the Network tab, then WiFi Points and tap on Add WiFi Point.
5. Unbox the GO Smart Wi-Fi Beacon and before powering it on, on your mobile phone, tap on Scan code to utilise the QR scanner to capture the code located under your Beacon.
6. Connect the GO Smart Wi-Fi Beacon with Wi-Fi by tapping on Next and then follow the app instructions to find the optimal location for your Beacon.
7. Once the app prompts the best location, plug in your GO Smart Wi-Fi Beacon to the nearest power outlet. Switch the Beacon on by sliding the power button to ON. The LED on the Beacon will light up white.
8. The app will ask you to confirm It’s powered on. Following this, the GO Smart Wi-Fi Beacon will appear as Connection in progress and the LED will flash yellow, then slowly flash white, until it turns solid blue when fully connected. Once done press Okay.
9. The GO Smart Wi-Fi Beacon setup is complete when it’s visible in the Network Map on the Network tab.

To add more GO Smart Wi-Fi Beacons to your network, you need to repeat Step 4 to Step 9.

Meanwhile, for wired devices, you can connect them directly to the GO Smart Wi-Fi Beacons using an Ethernet cable by plugging them into the yellow LAN port.

Want to connect your GO Smart Wi-Fi Nokia Beacons to a standard GO modem? Just follow these simple steps:

1. Ensure you have an internet connection on your phone and download the Nokia WIFI app from Google Play Store or Apple App Store.
2. Now turn off the Wi-Fi on your GO modem. Refer to the Switch off Wi-Fi section on page 8 to see the steps for your particular modem type.
3. Unbox the first GO Smart Wi-Fi Beacon and use the supplied Ethernet cable to connect one end to the blue WAN port on the Beacon, and the other end to any of the yellow ports 1-3 on the modem.
4. Plug the GO Smart Wi-Fi Beacon in a power socket, close to the modem, and slide the power button on the bottom of the Beacon to ON.
5. Wait for the LED on the GO Smart Wi-Fi Beacon to become a steady blue after it stops flashing white/yellow.
6. Now, connect to the Wi-Fi from your GO Smart Wi-Fi Beacon by scanning the QR code.
7. Open the Nokia WiFi app and enter the username (advanceduser) and password found on the bottom of your GO Smart Wi-Fi Beacon, then press Sign In.
8. To add more GO Smart Wi-Fi Beacons to your network, go to the Network tab, choose WiFi points and tap on Add WiFi Point.
9. Connect your GO Smart Wi-Fi Beacon to Wi-Fi by tapping on Next and follow the app instructions to find the optimal location for your Beacon.
10. Once the optimal location has been found, tap on Scan code and utilise the QR scanner to capture the code located beneath the new GO Smart Wi-Fi Beacon. You may now power on the Beacon.
11. The GO Smart Wi-Fi Beacon will appear as Connection in progress.
12. The GO Smart Wi-Fi Beacon setup is complete when it’s visible in the Network Map on the Network tab.

To add more GO Smart Wi-Fi Beacons to your network, you need to repeat Step 8 to Step 12.

Meanwhile, for wired devices, you can connect them directly to the GO Smart Wi-Fi Beacons using an Ethernet cable by plugging them into the yellow LAN port.