You might need to set up your internet connection again if, for instance, you had to disconnect your equipment for some DIY work at home. Reconnecting your fixed home internet is straightforward. Just follow these steps:

1. Clip one side of the RJ11 (the grey cable provided by GO) into the port at the back of your modem, marked as “DSL“
2. Clip the other side of the RJ11 cable into the telephone socket port marked also as “DSL“.

If you are connecting to the internet using the Plug’n’GO modem, just switch on your modem, wait until all lights are on and then enter the Wi-Fi password into your device.

How to connect fibre cable to a Nokia Modem

1. Connect the power supply cable to the power port at the back of the modem.
2. Connect the fibre cable (coming from outside) to the green port located at the centre of the back of the modem.
3. If you have a telephone set, connect it to the TEL 1 grey port.
4. If you have a device that needs a direct connection to the modem, connect its cable to any of the yellow LAN ports.

How to Connect Fibre Cable to 789 / DGA / Sagemcom Modem

1. Connect the power supply cable to the power port at the back of the modem.
2. Connect the fibre cable (coming from outside) to the red port at the back of the modem.
3. If you have a telephone set, connect it to the first green port (for Sagemcom modem, there is only one green port).
4. If you have a device that requires a direct connection to the modem, connect its cable to any of the yellow LAN ports.

Just note that on the 789 modem, port 4 is reserved for the TV box and cannot be used for browsing devices.