Smart Wi-Fi 5 Pods Installation Guide

Welcome to the Smart Wi-Fi 5 Pods Installation Guide. We’re here to help you set up your Wi-Fi pods effortlessly while ensuring a stable and reliable network connection. Follow the steps below to get started:

Installing the Main Pod

  1. Begin by connecting your first Airties 4930 pod. Plug the electrical plug into a nearby socket and use an Ethernet (CAT-5e) cable to connect it to the LAN port on your GO modem.
  2. Turn on the Airties 4930 pod using the ‘Power On’ button at the back. Please allow a few minutes for the pod to set up the main access point of your Mesh network.

Setting up Additional Pods

  1. Take your additional pod and plug it into an electrical socket near the first connected pod. You can move the second pod later after the setup is complete.
  2. Turn on the additional pod and wait for the two green lights to start flashing.
  3. Press and hold the WPS button (the button at the front of the pod with two arrows) on both the main and additional pods for 1 second.
  4. Allow some time for the devices to pair with each other. This might take up to 3 minutes.
  5. Once the pairing is complete, you can relocate the additional pod to another area of your home.

Quick Tip: To ensure correct pairing, observe two solid green lights with a quick blink every 5 seconds on the 5GHz lights of the pods.

Connecting to the Airties Vision App
If you’re looking to connect your Smart Wi-Fi 5 pods to the Airties Vision app, please refer to the following FAQ.

By following these instructions, you’ll be on your way to a seamless and efficient Wi-Fi network experience with your Smart Wi-Fi 5 pods. Should you encounter any issues or require further assistance, get in touch with us by sending us a message on WhatsApp, Facebook Messenger or Live Chat. We’re here to help!